Sign in
Password recovery
Enrollment successful
Welcome to our website! Thank you for register
Questions has been sent successfully
Your message has been sent successfully. You can see it on the website after administrator approval

FCP PUiZ “Tiras-1”

A modern control panel for control of 1 extinguishment zone (gas, powder, aerosol).

Functionality and versatility of PUiZ "Tiras-1" make it a good solution to implement the fire extinguishment system at premises of any size.

Basic parameters:

  • Standalone operation / operation with other fire alarm control panel;
  • Control of 1 extinguishment zone;
  • Control of extinguisher start/stop;
  • Two fire alarm loops;
  • Delay for evacuation;
  • Switch on extinguisher alert;
  • Manual triggering and emergency stop of fire extinguishment via remote devices - PAZ/PRZ or built-in buttons in the housing.

Features:

  • RS-485 system bus to operate with FCPs of "Tiras-P", "Tiras-A.1," "Tiras- A" series;
  • Operation with third-party FCPs;
  • Built-in Touch Memory reader for easy operation;
  • Input for door monitoring;
  • Output for "Automatic off" signal;
  • Output "alert", triggered in case of fire in one of zones (for example, to turn off ventilation);
  • Programming via PC or DIP-switches;
  • Ergonomic plastic case.

 

Specifications

  • Number of alarm loops: 2;
  • Supply voltage (terminals 12V): 10 - 15 V;
  • Supply voltage of extinguisher (input «UП+») – software control “12V”: 10-15 V;
  • Supply voltage of extinguisher (input "UП+") – software control "24V": 20 V - 30 V;
  • Supply voltage of emergency alert (input "+UOP") 10-15V;
  • Current consumption (quiescent mode): max 100 mA;
  • Current consumption (extinguishment mode), not more than: 225 mA;
  • Current through contacts "П+" / "П-", not more than: 5 A*;
  • Current through contacts "ОПОВ.", not more than 5 A*;
  • Voltage in controlled circuits (normal): 11 - 12,5 V;
  • Current limit in detection circuit - no more than 60 mA.

 

Parameters of outputs «УП», «ВН», «СК», «Р/А», «ТР»:

  • Load current, max: 100 mA;
  • External voltage, not more than: 28 V;
  • Resettable fuse for each output: 200 mA;
  • Resistance losses between input wires, at least: 50 kOm;
  • Resistance of zone wire, not more than: 250 Om;
  • Zone response time at alarm (failure), less than: 1 sec;
  • Fault definition time, less than: 1 sec.

* - When applying voltage to the output contacts from external power supply

Certificates

  • Certificate of conformity to the device receiving and control firefighters PUiZ 'Tiras-1' with the function of control of automatic means of fire protection. sert_puiz.pdf (1.86 Mb) Download

Documents

  • Passport "PUiZ" Tiras-1 "(version 2) puiztiras1_ps_1_ua.pdf (1.79 Mb) Download

For project engineer

  • Scheme for connecting the sirens to the "Tyras-1" PUiZ shema_piz.zip (46.64 Kb) Download
  • Схема подключения ПУиЗ "Тирас-1" shema_prustrij_piz.rar (49.96 Kb) Download
Tiras-4P

Fire alarm control panel is designed to implement a reliable system of fire security on small objects.

Look
Tiras-8P

Fire alarm device, intended for the implementation of a reliable system of fire safety on secondary sites.

Look
Tiras-16P

This modern fire alarm control panel is designed to implement a reliable system of fire security on medium objects.

Look
Tiras PRIME 8

Fire alarm control panel of a new generation - 8 zones.

Look
Tiras-4P.1

Fire alarm control panel with built-in GSM / GPRS dialer is designed to implement a reliable system of fire safety on small objects.

Look
Tiras-A

Addressable fire alarm control panel is designed for the organization of fire safety at objects of any complexity.

Look

Скільки ПУіЗ можливо підключити до ППКП "Тірас-4П"?

До ППКП "Тірас-4П" можливо підключити: 2 ПУіЗ;

До ППКП  "Тірас-8П" можливо підключити :4 ПУіЗ

До ППКП "Тірас-16П" можливо підключити: 8 ПУіЗ  

Ask a question

You must agree to the terms of the Privacy Policy

Currently there are no comments on this product

Post a comment

You must agree to the terms of the Privacy Policy