Sign in
Forgot your password? Registration
Password recovery
Registration
Enrollment successful
Welcome to our website! Thank you for register
Questions has been sent successfully
Your message has been sent successfully. You can see it on the website after administrator approval

Tiras-16P

 A modern fire alarm control panel is designed to implement a reliable system of fire safety at medium premises (hotels, offices, shops, banks, warehouses, etc.).

Optimum functionality and wide range of additional equipment allow to meet the individual fire safety requirements of a particular object, thus simplifying the job of both developing engineer, installer and service personnel.

  Basic parameters:

  • 16 alarm loops;
  • 3 algorithms of detector verification;
  • Built relay outputs "alert," "fire," "fault";
  • Connection of relay lines module, MRL;
  • Connection of dialer module: MCA or MCA-GSM to transmit signals to the central monitoring station.
  • Integrated power supply unit and a slot for battery 18 Ah.

Features:

  • Two embedded programmable outputs of the "open collector" type;
  • Built-in universal input;
  • Programming via keyboard or PC;
  • RS-485 system bus for connecting of additional devices: PUiZ "Tiras-1" MRL-8, MKI, PKI "Tiras";
  • The possibility of implementation of fire extinguishing systems with the help of PUiZ "Tiras-1";
  • Remote control and device polling (operating with CMS "Most-P" in the GPRS-channel);
  • Touch Memory interface.

  

 

Specifications

  • Number of alarm loops: 16;
  • Voltage in loop in standby mode: 11 - 12,5 V;
  • Resistance of alarm loop: no more than 250 Ohms;
  • Response time of alarm loop: no more than 0.4 seconds;
  • Power consumption from the mains: less than 50 VA;
  • Current consumption from the mains: less than 0.23 A;
  • Current consumption from the battery, not more (quiescent mode) than 170 mA;
  • Current consumption from the battery, not more (alarm mode) than 260 mA;
  • Slot for battery: 18 Ah;
  • Power supply: 220V (-15%,+10%), 50±1 Hz;
  • Load on the DET output + 12V, no more than 2 A;
  • Load on the SIR output, no more than 5 A;
  • Operating temperatures range: -5°C..+ 40°C;
  • Dimensions: 330x410x85 mm.

Documents

  • Installation Instructions PPCP "Tiras-16P" (version 5) tiras16p_nv_5_ua.pdf (1.60 Mb) Download
  • Instruction on exploitation "Tiras-16P" (version 5) tiras16p_re_5_ru.pdf (765.02 Kb) Download

Certificates

  • Certificate of conformity for fire receiving-control devices "Tiras PRIME 8", "Tiras PRIME 16", "Tiras-4P '," Tiras-4P.1 ",'" Tiras-8P "," Tiras-8P.1 "', "Tiras-16P", "Tiras-16.128P", "Tiras PRIME 8L" as a part according to the appendix sert_convencional.pdf (3.71 Mb) Download
  • Certificate of examination equipment and protective systems intended for use in potentially explosive environments. Series: Tiras Р, Tiras PRIME, Tiras-А sc_170201_red_1.pdf (6.48 Mb) Download
  • Декларація про відповідність пожежних приладів pozhezhni_prylady.zip (8.57 Mb) Download

For project engineer

  • Connection scheme "Tiras-16P" shema16p.zip (104.94 Kb) Download
FCP PUiZ “Tiras-1”

A modern control panel for control of 1 extinguishment zone (gas, powder and aerosol).

Look
USB-programmer

USB-programmer is designed to change/write configuration to FCPs of "Tiras" series.

Look
MCA-GSM

Digital autodial module, transmitting messages via the GSM data transmisssion channel (CSD/GPRS).

Look

Currently there are no questions associated with this product

Ask a question

You must agree to the terms of the Privacy Policy

Currently there are no comments on this product

Post a comment

You must agree to the terms of the Privacy Policy