Sign in
Password recovery
Enrollment successful
Welcome to our website! Thank you for register
Questions has been sent successfully
Your message has been sent successfully. You can see it on the website after administrator approval

Tiras-4P

Fire alarm control panel is designed to implement a reliable system of fire safety at small premises (offices, shops, banks, warehouses, etc.).

Optimum functionality and wide range of additional equipment allow to meet the individual fire safety requirements of a particular object, thus simplifying the job of both developing engineer, installer and service personnel.

Basic parameters:

  • 4 alarm loops;
  • 3 algorithms of detector verification;
  • Built relay outputs "alert," "fire," "fault";
  • Connection of relay lines module, MRL;
  • Connection of dialer module: MCA or MCA-GSM to transmit signals to the central monitoring station.
  • Integrated power supply unit and a slot for battery 7 Ah.

Features:

  • Two embedded programmable outputs of the "open collector" type;
  • Integrated universal input;
  • Programming via keyboard or PC;
  • RS-485 system bus for connecting of additional devices: PUiZ "Tiras-1" MRL-8, MKI, PKI "Tiras";
  • The possibility of implementation of fire extinguishing systems with the help of PUiZ "Tiras-1";
  • Remote control and device polling (operating with CMS "Most-P" in the GPRS-channel);
  • Touch Memory interface.

 

Specifications

  • Number of alarm loops: 4;
  • Voltage in loop in standby mode: 11 - 12,5 V;
  • Resistance of alarm loop: no more than 250 Ohms;
  • Response time of alarm loop: no more than 0.4 seconds;
  • Power consumption from the mains: less than 50 VA;
  • Current consumption from the mains: less than 0.23 A;
  • Current consumption from the battery, not more (quiescent mode) than: 170 mA;
  • Current consumption from the battery, not more (alarm mode) than: 260 mA;
  • Slot for battery: 18 Ah;
  • Power supply 220V (-15%,+10%), 50±1 Hz;
  • Load on the DET output + 12V, no more than 2 A;
  • Load on the SIR output, no more than 5A;
  • Operating temperatures range: -5°C..+ 40°C;
  • Dimensions: 330x410x85 mm.

 

 

 

Documents

  • Instruction on exploitation "Tiras-4P" (version 5) tiras4p_ne_5_ua.pdf (810.46 Kb) Download
  • Installation instruction of PPCP "Tiras-4P" (version 5) tiras_48installer_manual_ru.pdf (2.52 Mb) Download

Certificates

  • Certificate of Conformity on PPC 'Tiras-P' in the executions: 'Tyras-4P', 'Tiras-4P.1,' 'Tiras-8P', 'Tiras-8P.1', 'Tiras-16P' from PKI 'Tiras' , 'Tiras-16.128P' from MIC-16.128, consisting of: MKI, МРЛ-2, МРЛ-2.1, МРЛ-2.1 box, МРЛ-2.2, МБИ-2., M-NET.2, МЦ sert_tiras_p.pdf (1.89 Mb) Download

For project engineer

  • Схема підключення ППКП "Тірас 4П" shema4p.zip (108.22 Kb) Download
FCP PUiZ “Tiras-1”

A modern control panel for control of 1 extinguishment zone (gas, powder and aerosol).

Look
USB-programmer

USB-programmer is designed to change/write configuration to FCPs of "Tiras" series.

Look
MCA

Digital autodial module transmits messages to central monitoring station via a phone line.

Look
MCA-GSM

Digital autodial module, transmitting messages via the GSM data transmisssion channel (CSD/GPRS).

Look
MRL-2.2

External module with two relay outputs for alert system

Look

Currently there are no questions associated with this product

Ask a question

You must agree to the terms of the Privacy Policy

Currently there are no comments on this product

Post a comment

You must agree to the terms of the Privacy Policy